How To Siphon Water From A Pool With A Hose: A Simplified Guide Only For you

Siphoning the swimming pool is truly necessary when you want to drain the entire pool or change the water of the pool. We usually do it when the water of our swimming pool is so dirty that it’s beyond filtering.

But how do we remove the water from our pool? How to siphon water from a pool with a hose? We’ve thoroughly explained the process here; also, we’ve included the equipment you require and fix some common problems.

The process is simple, you have to prepare the equipment first which are a hose, a pump, and a water source. The next step is to connect the hose, making sure you’ve an end of the hose submerged in the pool.

Then, siphon the water with the hose using either the ‘Gravity method’ or the ‘Pumping method’.

Finally, dispose of the water somewhere safe and that’s all to it.

Table of Contents

What equipment do you need to Siphon water from a Pool?

We always have to prepare before we initiate a task. But let us get to know what is siphoning in a pool and then we can get to know how to remove water from a pool with a hose.

So, first thing first, a siphon is a kind of a tube which will allow your pool water to move upwards. In the case of a swimming pool, the origin reservoir is the pool itself. The water will travel uphill and then move downwards without any help from the pool’s pump.

Now, what kinds of equipment should we require to siphon pool with hose.

· Hose

Of course, we will be needing a hose. The title itself says that we are going to siphon water from the pool with a hose. What kind of hoses do we need then? Siphoning hoses are probably the best options here. They are originally designed for siphoning water from pools.

What if you don’t want to spend extra credits on purchasing a hose as you have a gardening hose present at your home? Well, you’d be surprised to know that but you can use a gardening hose, too.

· Pool Pump

We’ve stated that in siphoning, we won’t be needing any pumps, right? Then why do we need them now? We can’t siphon an empty pool. We need water which will be siphoned from the pool to another location. For that water to be supplied, we need pool pumps.

· Water source

Pumps will just move the water around from the source to the pool. They can’t produce water; we need a source where the water will be produced. And if we need to fill up our pool through siphoning, we need that water source.

Step-by-step guide for siphoning water with a hose

We’ve gathered enough knowledge about what equipment we need for siphoning. Now, let’s get to know how to siphon water from a pool with a hose.

Preparing the equipment

Alright, what was our equipment again? A hose, a pump, and a water source, right? Typically, when we are trying to drain water by siphoning, we have to place one end of the hose in the pool and use a pump to accelerate the process.

The water source is needed when we are required to drain water from the water source to the swimming pool. That’s all we need to do for the preparation for our siphoning the pool with a hose.

Connecting the hoses

A garden hose or a siphoning is more than enough for the process. Firstly, we have to place one open end of the hose to completely submerged in the water of the swimming pool. There’s no exception in this step.

We can leave the other end of the hose at a lower surface or we could attach it to the main pump.

Siphoning water from the pool

Now, we can either take the other end of the hose and place it at a lower surface. If we are a fan of Newton, you’d love how this process works. The gravity would do its work and create a low atmospheric pressure so that the water is being pulled uphill without any force applied from the pool pump.

Or, we can take the pool pump, apply a bit of pressure so that the siphoning tube or hose can let the water flow through it. Once the water is being pulled through the hose, we have to wait until it reaches at the tip of the other end of the hose (the end that is not submerged under the water).

If the water has reached the tip, we have to kink the hose so that the water cannot pass anymore. That’s where comes our disposal part for the guide on how to siphon a pool with a hose.

Disposing of the water safely

If we follow the first step where we just needed to place the swimming pool at a higher surface from the disposal area, we don’t need to take many measures. Just pick the place and dispose of the water there. Here’s a guide on how to drain water from a pool.

Now, if you are not a fan of Newton and didn’t choose the gravity-pulling method, you have much better options than the first method.

Here, you can take your hose that has been kinked so that the water is unable to pass through the hose anymore. Make sure you have a long enough hose to reach the disposal area or place your swimming pool close enough to the area so that the hose you already have can reach there.

Checking for air locks

Now comes a crucial part about hoses. You probably have heard air lock, haven’t you? It’s when there is air trapped inside your hoses. Well, you should know how to get air out of pool vacuum hose, otherwise, you cannot clean your pool correctly.

You have to regularly check for leaks and kinks if you want to prevent air lock. Also, make sure your hoses are correctly attached to the pool equipment. Many cases have been registered that their hoses are coming off more than often. You have to know about how to keep pool hose from coming off.

You could use hose clamps, plastics wraps, regular tapes, etc.

What are the common issues with siphoning water and how to troubleshoot them?

There are few problems you could face while siphoning the water from a swimming pool. Here a few noted down:

· Hose getting clogged

Hose getting clogged is basically hose getting air locked. And you already know why hoses are getting air locked. But there are times when the air isn’t responsible, but the debris and dirt is. They cluster up inside the hoses.

· Hose not reaching the desired location

Hoses need to reach the disposal area no matter what. You cannot dump the water of your swimming pool anywhere you like. Either you need to move the swimming pool (which is not possible for in-ground pools) or you just need to fix the problem.

Now that we know what are the most common problems you’ll be facing, it’s high time you should fix them, shouldn’t you?

· Clearing the clog

Removing air locks is pretty easy, you just need to fix the kinks or leaks with DIY stuff, or you could just hire a swimming pool professional. And when the problem is with debris, just clean the insides of the hose properly.

· Using a longer hose

Well, if your hose is not able to reach your desired location, you just need a longer hose, right?

Before you leave

There are times we mess up the simplest thing in the world like how to siphon water out with a hose. But that ends today. If you followed our instructions on the equipment you’ll require, the steps to siphon water with a hose, fixing some common problems, you are good to go.

If you are still having problems after following our instructions (which is unlikely to happen), either contact us to explain your problem, or talk with any swimming pool services near you. We hope they can help you.

If we aren’t much of help, try contracting pool services.